Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500500 ---BRAND NEW---
US $649.99
|
Miller Electric Mfg Co 452 MIG Welder, 200/230/460 Volt, 3 Phase, 60 Hertz
US $3,922.99
|
Miller Electric Mfg Co MIG Welder, 200/230/460 Volt, 3 Phase, 60 Hertz 903786
US $3,191.99
|
Miller Electric Mfg Co 302 MIG Welder, 200/230/460 Volt, 3 Phase, 60 Hertz
US $3,373.99
|
Miller Electric Mfg Co 350 MPa MIG Welder, 115 Volt, 1 or 3 Phase, 50/60 Hertz
US $4,629.99
|
Miller Electric Mfg Co 456P MIG Welder, 575 Volt, 3 Phase 903546
US $5,553.99
|
Miller Electric Mfg Co 456MP MIG Welder, 230/460 Volt, 3 Phase, 60 Hertz 903725
US $6,455.99
|
Passport Plus MIG Welder, 115/230 Volt, Single Phase, 50/60 Hertz 907401
US $2,012.99
|
What kind of welder should I buy for welding angle iron?
Im planning on welding trailer frames, i would like to be able to weld thicker metal later, i was looking at ark and mig welders, and i wanted to know how many amps and volts to get. I will be welding 1/8" to 3/16" angle iron i think, i don't really know yet.
get an arc welder that has at least 200 amps dc
a name brand such as lincoln miller etc
practice with the 6013
switch to 7018 for higher strength
mig welds are strong but brittle they will break without warning if overloaded
and yes i know a lot of shops use the mig on everything
but if they see what i see all of the time they wouldn,t
arc welds will usually start cracking before they fail
on the lighter metals you are talking about the mig would be ok or if you plan to do any aluminum welding
but if you want to go to heavier metal later the arc welder is better
most of my welding is done on 3/4 inch or thicker metal
i will use my mig if it is nonstructural
if you think what i say about a mig is not true try fillet welds on 1/4 inch plate then bend them
90 AMP 120 Volt WIRE FEED FLUX MIG WELDER NO GAS NESSASARY #7643 , 110 AMP, 220 VOLT FLUX AND MIG WELDER TADD, 110 AMP, 220 VOLT FLUX AND MIG WELDER TADD, 120 AMP 230 VOLT MIG AND FLUX WELDER, 110 AMP, 220 VOLT FLUX AND MIG WELDER TADD, 120 AMP 230 VOLT MIG AND FLUX WELDER, Esab 0558101320 Caddy MIG C160I 230 Volt Welder, Shark MIG 135 115 Volt/120 Volt Welder Kit, 110 AMP, 220 VOLT FLUX AND MIG WELDER TADD, MIG 135F FLUX CORE WIRE MIG WELDER 110 VOLT NEW NO GAS, HOBART HANDLER 190 MIG WELDER - NEW - 500554 Free Shipping 230volt 3yr warranty, Hobart Handler® 190 Mig Welder 220volt With Spool Gun New , Miller Electric Mfg Co 302 MIG Welder, 230/460/575 Volt, 3 Phase, 60 Hertz, Lincoln Weldpak 100 120 Volt Mig And Flux Welder, Hobart Handler® 190 Mig Welder 220volt With Spool Gun New , Clarke Welder Mig 130EN 120 Volt 130 Amp Flux or Gas Ea WE6523, chicago electric duel 110amp 220 volt mig wire feed welder , VINTAGE MILLER D.C. VOLTMETER VOLTS WELDER MIG TIG STICK , Lincoln Easy MIG 180 Welder - 180 Amp 230 Volt, Lincoln Easy MIG 140 Welder - 120 Volts 140 Amps , NEW CRAFTSMAN 20509 265-AMP 220-VOLT FLUXCORE MIG WIRE FEED WELDER, Easy Mig 140 120 Volt AC Input Compact Wire Welder LEWK2697-1 BRAND NEW!, Dual Flux Mig Wire Core Welder 25-85 AMP Welding Gas No Gas 110 Volt, Miller Electric Mfg Co 350 MIG Welder 200/230/460 Volt, 60 Hertz, 1 Or 3 Phase, Miller Electric Mfg Co 452 MIG Welder, 230/460/575 Volt, 3 Phase, 60 Hertz, Dual 25-85 AMP Flux Mig Wire Core Welder Welding Gas No Gas 110 Volt, MIG WELDER 42 VOLT WIRE FEED MOTOR (TYPE: OSLV), New Rand MIG Welder 130F/120 amp/110 Volt/flux core, CLARKE 265T MIG Welder 230 Volts New, Miller Electric Mfg Co 252 MIG Welder 208/230 Volt, (ISPM-15) 907312012,
Tags: 110 volt mig welder, 120 volt mig welder, 220 volt mig welder, best 110 volt mig welder, best 115 volt mig welder, hardware, mig, shopping, welder, welding
This entry was posted
on Friday, May 28th, 2010 at 12:38 pm and is filed under Welding.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Leave a Comment
You must be logged in to post a comment.