Construction And Energy Supplies
Best Quality For You

Valve Press System



NEW! NIBCO 1
NEW! NIBCO 1" BRONZE PRESS BALL VALVE FOR PRESS SYSTEMS
US $37.95
LOT OF 2 FNW 1-1/4
LOT OF 2 FNW 1-1/4" BRASS BALL VALVES FOR PRESS SYSTEM
US $59.95
Hydraulic pump Summa 10 HP 13 solenoid valve Skateboard press system
Hydraulic pump Summa 10 HP 13 solenoid valve Skateboard press system
US $4,200.00
Powered by phpBay Pro



Valve Press System
1997 Chevy suburban no start situation any techs online?

I am trying to narrow a no start situation. New fuel pump,inline filter and i have fuel at the shrader valve seems to have proper presssure. Can i spray some starting fluid into the throttlebody it is a central(sfi) type system. I diddnt chek my ignition yet due to lack of equipment with me at the time. Going to verify good spark tomorrow. I was told the car will run but seems to be starving for fuel (lack of power) no stumbling or irratic symptoms. Going by my trusty ol Haynes manual it states that "the injectors are a non serviceable item". ok fine but will it be worth my while to check the filter behind the press. regulator? Any other pert. information regarding this particular engine would be a great help to me. By the way I replaced my injectors in a 1995 Chevy Astro van with a 4.3 liter cmfi type system. Thank you for your input in advance.

Is the pump running? You can shoot starting fluid into the air box with some one cranking it. If it pops off you know you're having fuel delivery issues.That "non-serviceable" part is for sale at many parts stores. It is in the intake and a pretty big job.It can and has been done in the driveway so don't get too worried.If at all possible,get your hands on a GM manual. Goodluck!



Hydraulic pump Summa 10 HP 13 solenoid valve Skateboard press system , LOT OF 2 FNW 1-1/4" BRASS BALL VALVES FOR PRESS SYSTEM, NEW! NIBCO 1" BRONZE PRESS BALL VALVE FOR PRESS SYSTEMS,
Powered by phpBay Pro

Leave a Comment

You must be logged in to post a comment.