Which type of weld should i use for my Hydrogen HHO Generator?
I have made many Hydrogen fuel cells in the past, but i am looking to make a quality one that can be put into a car for long term use. It will use 8 large stainless steel wall plates. Each plate needs to have 1 eyelet welded to it. I was thinking about TIG welding it, and i think that it is about my only option since i am using stainless steel, but is that too hot for a flimsy little eyelet? Also, I am not going to fasten them down with bolts...the metal is hard to drill through and a bolt protrudes too far on either side. I need the plates very VERY close together. (btw, an eyelet is a little metal loop that can be fastened to a bolt or screw hole, and it has a place to crimp wires down on it).
Any welding gurus care to share a little insight?
Please and thank you 
TIG, welding can be controlled very well and is very suitable for small or thin pieces to be joined. One bad thing about stainless is , heat distorts it.which can be controlled somewhat by clamping the piece while welding and letting it cool while clamped . Thickness of the pieces to be joined has a lot to do with it.
Welding TIG wire 308L Stainless Steel 1/16 x 36" 1lb, Stainless Steel TIG Welding Wire 3-SMW 1/8" X 36" (10LB) , Stainless Steel TIG Welding Wire ER308/308L 3/32" X 36" (10LB) , WTS USA MADE PREMIUM 316 STAINLESS TIG WIRE ER316/316L 1/16"x36" 10 lbs. ER316l , IMPORTED 316 PREMIUM STAINLESS TIG WIRE ER316/ER316L .035x36" 20 lbs 316l, WTS International Premium 308 Stainless Tig Wire ER308/308L 1/16"x36" 10 lbs , American Filler Metals U.S.A. 316 stainless ER316/316L .045x36" 10 lbs. TIG Wire, 1/8" X 36" ER309LMo Avesta P5 Stainless Steel TIG Wire 10 Tube Set of: 10 59455, Techalloy 316/316L Stainless Steel TIG welding wire 10LB 3/32" Made in USA, Techalloy 316/316L Stainless Steel TIG welding wire 10LB 1/16" Made in USA, Welding TIG Wire 308L Stainless 3/32x36" 1lb, 347 Stainless Steel TIG Weld Filler Rod Wire 0.045" X 18" AMS 5680 Lot 20 , Techniweld Stainless Steel 308L Tig Welding Filler Wire 1/16 x 36 10 Pounds, 30# Sandvik Tig Welding Wire Rod ER316/316L 0.045 x 36 Stamped, Stainless (#992), Kiswel Stainless Steel 308L Tig Welding Filler Wire 3/32" x 36" 10 Pounds, Radnor Stainless Steel 316L Tig Welding Filler Wire 1/8 x 36 20 Pounds, Radnor Stainless Steel 308L Tig Welding Filler Wire 1/8 x 36 10 Pounds, Inweld Stainless Steel 317L Tig Welding Filler Wire 1/8 x 36 10 Pounds, Techniweld Stainless Steel 308L Tig Welding Filler Wire 1/8 x 36 10 Pounds, Techniweld Stainless Steel 308L Tig Welding Filler Wire 3/32 x 36 10 Pounds, FirePower Stainless Steel Tig Welding Filler Wire 3/32 x 36 10 Pounds, stainless steel tig welding wire 10 pound box several sizes free shipping, Harris EP316L Stainless Steel Tig Wire 1/16x36" 10# AS1, ER 316 / 316L STAINLESS TIG WIRE 1/16" X 36" 10# pkg, ER 308 / 308L STAINLESS TIG WIRE 1/8" X 36" 10# PK, ER 316 / 316L STAINLESS TIG WIRE .045" X 36" 10# PKG, ER 316 / 316L STAINLESS TIG WIRE 3/32" X 36" 10# PKG, ER 308 / 308L STAINLESS TIG WIRE .035 X 36" 10# PKG, ER 308 / 308L STAINLESS TIG WIRE 3/32" X 36" 10# PKG, ER 316 / 316L STAINLESS TIG WIRE 1/8" X 36" 10# PKG,
Tags: stainless steel tig wire, stainless tig wire
This entry was posted
on Sunday, May 16th, 2010 at 10:22 pm and is filed under Welding.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Leave a Comment
You must be logged in to post a comment.