No flow from keg?
I have cleaned and sanitized the keg. I attached the ball lock disconnects. They seem to grip loosely "wiggle back and forth" but do not attach any more snugly to the ports. Are they attached properly? If I push down any more, they do not want to attach tighter. I attached Grey (gas) for IN and Black (beer) for OUT. I opened the gas out stem on the regulator (red handle), opened CO2 tank valve, open screw fully. CO2 tank gauge reads about 900 and holds steady. Adjust pressure screw to 5psi (holds steady). Spray hose connections with soapy solution, no leaks. Depress tap, NO FLOW. Currently there is sanitizing solution in the keg. I want to run it through the beverage line to sanitze, but NO FLOW. When I pull the quick release ring on the keg, there is no hiss. Does that mean there is no CO2 getting into the keg? If so, why am I getting steady readings on my gauges and no leaks with the soapy water test? How do I remedy this? What is the correct way to attach ball lock disconnects?
Try this site http://www.micromatic.com/forum/us-en/alltopics.php
1/2" F Thread Pipe Full Port Red Lever Ball Valve, 3/10" OD Crimp Hose Dual Port Lever Ball Valve Connector, Dual Head 5.7cm Thread Full Port Ylw Lever Ball Valve, Plumbing 1/2" x 1/2" Slip 2 Way Full Port PVC-U Ball Valve White, Female to 11.5mm Male Thread Full Port Lever Ball Valve, 1/2" F Thread Pipe Full Port Red Lever Ball Valve, Full Port F to F Thread Plastic Coated Grip Ball Valve 1/4", 3/10" OD Crimp Hose Dual Port Lever Ball Valve Connector, 2-1/2" Apollo 70-109-01 Bronze Std Port Ball Valve, 2 Piece, & Lever Handle, 2" NIBCO BALL VALVE SP-110 BRASS THREADED PLUMBING FULL PORT MTT-585-70 M X FM, Northern Full Port Ball Valve - 1in. Model# 60543, Milton Full Port Ball Valve-1/2in x 1/2in FNPT #S-1094-8, Full Port 1/4" PT to 1/4" PT Thread Red Lever Handle Ball Valve, Female to Female 2.4cm Thread Full Port Tube Ball Valve, Milton Full Port Ball Valve-3/8in x 3/8in FNPT #S-1094-6, Plastic Coated Lever 47/64" Thread Full Port Brass Ball Valve, 5 LOT 1" WATTS REGULATOR FBV-3 BALL VALVES BRASS THREADED PLUMBING FULL PORT , 4 LOT 3/4" WATTS REGULATOR FBV-3 BALL VALVES BRASS THREADED PLUMBING F- PORT , 4 LOT 3/4" BALL VALVES BRASS THREADED PLUMBING AQUA # 603 FULL PORT 600WOG, Brass Boston Ball Valve 1 1/4" inch Full Port - NPT end piece - Fire Sprinkler, Green Plastic Coated Lever 47/64" Thread Full Port Brass Ball Valve, Pneumatic Control 0.39" Connect Hole OD Full Port Ball Valve, Plumbing 1" x 1" Slip Ends Full Port PVC Ball Valve White, 13mm Female to 11mm Male Thread F/M Tee Handle Full Port Ball Valve, Lot Of 5 Legend T-1002 Brass Full Port Ball Valves 3/4" 600 WOG 150 WSP, Legend Valve T-1002 Brass Full Port Ball Valve 1" 600 WOG 150 WSP, Water Gas Flow Control Female to Female Thread Full Port Ball Valve, 1/4 Turn 40mm x 40mm Slip Water Shut Off Full Port HDPE Ball Valve, Irrigation Fittings Double Port 1" PVC Tube Ball Valve, 1-1/4" NPT Full Port Brass Ball Valves 600WOG UL Listed,
Tags: ball, biodiesel, full port ball valve, full port ball valve cv, multi port ball valve, port ball valve, port,, standard port ball valve, valves,, way
This entry was posted
on Wednesday, December 22nd, 2010 at 3:41 pm and is filed under Building Materials.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Leave a Comment
You must be logged in to post a comment.