I have 0 gauge wire for my car and need to put it in a ring terminal. I don't want to copper to oxidize and whatnot, so I am soldering it in. Would the correct process be to strip the wire, put it into the ring terminal, crimp it with one of those table presses, then put solder on the joint where the wire is exposed and have the solder also touch the metal on the ring terminal?
If this is not the way any guidance is appreciated. Thank you.
That pretty much covers it. Crimp the terminal on the wire, then heat the crimped part with a soldering gun or torch and let the solder flow into the exposed wire end. Remove the terminal from the vise before you start soldering, or the vise will act as a heat sink and make it harder to heat the terminal.
6 GAUGE COPPER UN-INSULATED #10 RING CRIMP CONNECTOR TERMINAL (QTY 25), 3/4" Pex Crimper Crimping Tool Go No Go Copper Ring Plumbing Crimp Clamp Gauge, 3/4" Pex Crimper Crimping Tool Go No Go Copper Ring Plumbing Crimp Clamp Gauge, 6 GAUGE AWG COPPER UN-INSULATED 1/4" RING CRIMP CONNECTOR TERMINAL (QTY 10), 4 GAUGE AWG COPPER UN-INSULATED 5/16" RING CRIMP CONNECTOR TERMINAL (QTY 5), Lot 200 Copper Electrical Crimp Ring Wire Cable Terminals Tin Plt. #22 - #18 AWG, ZURN PEX QCR4X Copper Crimp Ring - 3/4" PEX , ZURN PEX QCR3X Copper Crimp Ring - 1/2" PEX , 27PCS 10MM SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, 1/2" & 3/4" Pex Crimper Crimp 2 Plumbing Crimping Tools Copper Ring Gonogo Gauge, 1/2" & 3/4" Copper Ring Plumbing Crimping 2 Pex Crimper Crimp Go No Go Gauge Set, 3/4" Pex Crimper Crimping Tool Go No Go Copper Ring Plumbing Crimp Clamp Gauge, #2 GAUGE COPPER UN-INSULATED 5/16" RING TERMINAL CRIMP CONNECTOR (QTY 10), 3/4" Pex Crimper Copper Ring Crimping Plumbing Tool Crimp W/ Gonogo Angle Gauge, #1 GAUGE AWG COPPER UN-INSULATED 3/8" RING CRIMP CONNECTOR TERMINAL (QTY 5), 44 PCS SOLID COPPER CLOSED CRIMP JUMP RINGS FINDINGS 9MM, 1/2" & 3/4" Pex Crimper Crimp 2 Plumbing Crimping Tools Copper Ring Gonogo Gauge, 1/2" & 3/4" Copper Ring Plumbing Crimping 2 Pex Crimper Crimp Go No Go Gauge Set, 2/0 GAUGE COPPER UN-INSULATED 1/2" RING CRIMP CONNECTOR TERMINAL (QTY 5), 2 Pex Crimper Crimp Plumbing Crimping 1/2" & 3/4" Tools Copper Ring Gonogo Gauge, Pex Copper Crimp Ring Cutter Removal Tool - Zurn Pex, 27PCS 10MM SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, 15MM 21PCS SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, 21PCS 15MM SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, vanguard 3/8 copper crimp rings black q300, vanguard 1/2 copper crimp rings black q100, 27PCS 10MM SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, Aluminum-copper Terminals 23mm Tube Inside Dia Crimp Ring Connector, 15MM 21PCS SHINING SILVER PLATED OVER COPPER CRIMP JUMP RINGS FINDINGS, 0.9" Tube Inside Dia Ring Crimp Aluminum Copper Terminals Connector,
Leave a Comment
You must be logged in to post a comment.