What specific steel is commonly used for the core of 14" dia. concrete diamond blades?
I need to find out the specific steel used in order to properly temper & to see if it will even make a good knife. Already have the designs cut out. Just need to shape, treat & finish.
A diamond blade may be composed of a steel core and powder metal which is combined with diamond crystals and then heated and pressed into a molding which form the diamond segments, also known as the "cutting teeth" of the blade. The diamond segments are then welded to the steel core. Alternate methods of manufacturing diamond blades include electroplating diamond crystal directly to a metal core, often a steel core, but occasionally other metals as well. And to a lesser extent, brazing is used to create single layer diamond blades. The method of adhering the diamond crystal will depend on the application intended.
The steel core can vary in design. Some of them have spaces (known as gullets) between each segment to provide cooling and slurry removal, while others have a single continuous rim for smoother chip-free cutting. The type of core that has to be used depends of the type of materials that will be cut.
Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Chopper) 18" x 0.125", Norton Wet Cutting Cured Concrete Diamond Blade (Charger) 14" x 0.110", Norton Wet Cutting Cured Concrete Diamond Blade (Charger) 14" x 0.110", Norton Wet Cutting Cured Concrete Diamond Blade (Charger) 14" x 0.110", Norton Wet Cutting Cured Concrete Diamond Blade (Charger) 14" x 0.110", Norton Wet Cutting Cured Concrete Diamond Blade (Charger) 14" x 0.110", 6 Wet or Dry Cutting DIAMOND 4" Saw Blades CONCRETE MASONRY LAPIDARY STONE SLATE, Norton Wet Cutting Asphalt Over Concrete Diamond Blade 14" x 0.125" CGWAOC1412, Norton Wet Cutting Asphalt Over Concrete Diamond Blade 14" x 0.125" CGWAOC1412, Norton Wet Cutting Asphalt Over Concrete Diamond Blade 14" x 0.125" CGWAOC1412, Norton Wet Cutting Asphalt Over Concrete Diamond Blade 14" x 0.125" CGWAOC1412, Norton Wet Cutting Asphalt Over Concrete Diamond Blade 14" x 0.125" CGWAOC1412, 10" WET CUT LAPIDARY DIAMOND SAW BLADE, CONCRETE BRICK STONE SLATE ROCK MASONRY, 10" DRY CUT DIAMOND SAW BLADE, CONCRETE BRICK LAPIDARY STONE SLATE ROCK MASONRY, 14" ALL CUT PRO POWERFUL DIAMOND BLADE 4 HARD CONCRETE BRICK BLOCK EVERYTHING, 16" ALL CUT PRO DIAMOND BLADE POWERFUL CUT HARD CONCRETE BRICK STONE EVERYTHING, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612, 1/2" -14" Diameter Premium Duty Wet Cutting Diamond Tipped Core Bit BP5612,
Tags: concrete, concrete cutting diamond, concrete cutting diamond blades, concrete cutting diamond chainsaw, concrete cutting diamond saw blades, concrete cutting diamond wire, cutting, diamond, saw, tile
This entry was posted
on Sunday, October 31st, 2010 at 12:16 am and is filed under Construction.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Leave a Comment
You must be logged in to post a comment.