where do I buy a 6" core drill?
6" is 152mm. I went on ebay and found one, but I want to be sure there is not a better way of buying. I only want to do one or two holes, possibly a few more (cat holes in concrete) [can't put in main door of house, as flat has a shared hallway; can't put in window as double-glazing]. But if I could buy a set with a few core drills in, that would be useful as will need smaller holes, too. But on ebay there are no sets with a 6" drill. The single drill I was looking at, looked to be fetching around £30 if I remember right, and seemed to be appearing regularly. Also, any tips on use of core drills? For instance, should I buy an electronic 'indicator' to maintain the correct rpm, or would that be a waste of money? If I haven't got a hose handy to cool the drill, can I just dip it in a bucket of water occasionally...?
Screwfix have some, as do most plumbers merchants, about £150 for a set with different sizes, the drill is not overly important as long as it has a decent clutch, and is over 600watts, do not use with hammer on the drill, and no need to cool the core bits.
NEW- 9" Diamond WET Coring Bit For Concrete Core Drill , New 4" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, New 5" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, New 4" Laser-Welded Wet Diamond Core Drill Bit Concrete Bore Rig, NEW- 10" Diamond WET Coring Bit For Concrete Core Drill, SDT 180 Wet Core Drill Stand Concrete Bore Boring Rig fits up to 8" bits, New 4" Laser-Welded Wet Diamond Core Drill Bit Concrete Bore Rig, NEW 10" Z-1 CORE DRILL 2 SPEED W/ STAND CONCRETE CORING by BLUEROCK™ TOOLS, 4" BLUROCK™ Z-1 CORE DRILL 2 SPEED W/ STAND NEW FOR CONCRETE CORING, 4" concrete core drill bit, bits 6" lomg body, BLUEROCK™ 10" Z-1RB CONCRETE CORE DRILL 2 SPEED w/ ROLLING BASE- PACKAGE DEAL, New 1 1/2" Laser-Welded Wet Diamond Core Drill Bit Concrete Bore Rig, 2 CONCRETE CORE HAMMER DRILL BITS, DRILLS, SDS max plus, HILTI 1 DD-BI 1/2" /11" HWC DIAMOND CORE DRILL BIT/CONCRETE BOREING BIT #30671, 4 1/8" concrete hammer core drill bit, bits, drills, 7" concrete core hammer drill bit, drills, bits, SDSmax, SPLINE, 2 1/2" concrete core hammer drill bit, drills, 10 concrete core drill bits spline SDS drills, 6" Diamond WET Coring Bit For Concrete Core Drill, NEW- 1.5" Diamond WET Coring Bit - Concrete Core Drill, New 6" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, New 8" Laser-Welded Wet Diamond Core Drill Bit Concrete Bore Rig, New 2" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, New 8" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, SDT 180 Wet Core Drill Stand Concrete Bore Boring Rig fits up to 8" bits, SDT 180 Wet Core Drill Stand Concrete Bore Boring Rig fits up to 8" bits, New 14" Laser Welded Dry Diamond Core Drill Bit Concrete Bore Rig, New 14" Laser-Welded Wet Diamond Core Drill Bit Concrete Bore Rig, Diamond Core Concrete Drill Bit 5" Diameter 1-1/4" Threaded core bore , Diamond Core Concrete Drill Bit 14" Diameter 1 1/8" NPT ,
Tags: bit,, concrete, concrete core drill, concrete core drill rental, concrete core drill rigs, concrete core drilling, concrete core drilling bits, core, diamond, drill
This entry was posted
on Wednesday, October 27th, 2010 at 5:56 am and is filed under Construction.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Leave a Comment
You must be logged in to post a comment.